Westinghouse air compressor, approximately 80 gallon tank, 1 phase, 220 volt, works

Delta model 10 contractors table saw, 1 ½ hp, 115/230 volt, 1 phase, table is 27” wide, 41” long, works

Power Kraft 10” radial arm saw, model TPC 2610A, stand is 29” long, 21” wide, 56” tall to the top of radial saw, works

Larin 10 Gallon abrasive blaster, model #AB-1080

Delta 12” drill press, model 11-990,  ½” chuck, 1/3hp, 115 volt, 1 phase, works

Craftsman 12” band saw/ sander, model #113.24201, 1/3 hp, 115/230 volt, 1 phase, 66” tall overall height, works

Delta home craft disc sander, 1/3 hp, 115 volt, 1 phase, cords are frayed, the unit is mounted to a cabinet, 33” long, 13” deep, 35” tall

Wood four drawer dresser, 29 ½” long, 18” deep, 38” tall , minor scratches

Craftsman six drawer tool box with top storage, 26” long, 12” deep, 15” tall, scratches and dents

Roll around cart with one drawer, 30” long, 16” wide, 36” tall, comes with keys

Craftsman ten drawer tool box with top storage, 26” long, 12” deep, 18” tall, comes with roll around cart, 28 ½” long, 20 ½” wide, 36” tall

Craftsman tool box, top box has ten drawers with top storage, 26” long, 12” deep, 18” tall, bottom box has six drawers, 26” long, 18 ½” deep, 52” tall overall, comes with anti slip matting

Craftsman tool box, top box has ten drawers with top storage, 26” long, 13” deep, 19” tall, bottom box has five drawers with bottom storage, 26 ½” long, 18” deep, 58” tall overall

Plastic roll around cart, 25” long, 16” wide, 36” tall, there is some paint on the cart

Plastic roll around cart, 25” long, 16” wide, 36” tall, one handle is missing and the other one is cracked in the handle

Two door cabinet with two shelves, 36” wide, 18” deep, 39” tall, minor scratches

Steel shelving unit with 33 metal bins full of switches, hose clamps, lags, trans motor mounts, trailer plugs, riveter brass fittings, small chain, battery ends, bolts, drill bits, tractor parts, misc. springs, eye bolts, large washer, wing nuts carriage bolts and misc. shelving unit is 37 ½” wide, 18 ½” deep, 84” tall, very heavy

Two door cabinet with five shelves, 36” wide, 19” deep, 87 ½” tall, hole on the side of cabinet, bottom shelf is dented, cabinet is a little rusty

Two door cabinet with four wood shelves, 25 ½” wide, 20” deep, 65” tall, minor rust

Two door cabinet with four wood shelves, 26” wide, 20” deep, 65” tall, minor rust and paint to the cabinet

Two door cabinet four shelves, 36” wide, 24” deep, 76 ½” tall, bottom shelf is really greasy, dents and scratches

Two door cabinet with eight shelves, 36 ½” wide, 20 ½” deep, 85” tall, minor scratches

Durham two door cabinet with four shelves, 48” wide, 24” deep, 79” tall, minor scratches and paint splattered on the front of cabinet

Napa Two door cabinet with top storage, 30” wide, 17 ½” deep, 59 ½” tall, paint splattered all over the cabinet

18” Aluminum pipe wrench, 18” pipe wrench and a 18” pipe wrench that is missing some parts

(5) Oilers

Misc. large ¾ drive sockets and axle nut sockets, extension, breaker bars, universal, ratchet, ¾” to ½” reducer

Misc. lot of screw drivers

Misc. lot of pliers, tin snips, side cutters, wire strippers, needle nose pliers

Misc. lot of screw drivers

Misc. lot of ¼”, 3/8”, ¾” sockets, 3/8” extension, ¼” ratchet

Misc. lot of metric  wrenches

Misc. lot of chisels and punches

Misc. lot of ½” drive sockets, 3/8” drive sockets, ¼” ratchet, ½” ratchet and 3/8” ratchet with misc. other sockets

Buffalo impact driver, Craftsman seal insulator tool

Misc. lot of ½” drive deep well sockets and punches

Misc. lot of ½” drive impact sockets and ½” deep well sockets

Misc. lot of ball pin hammers, 3 pound sledge hammer, The Bridgeport Howe MFG. Corp. USA 3 in 1 hammer/crow bar/nail puller, 10 pound sledge hammer & misc

Perma-Coil 5/8 – 11” coarse thread repair kit, ½ -20 thread repair kit, 5/8 -18 thread repair kit,  Ammco model 3800 cylinder hone kit

Klutch tap and die set, one die is missing, misc. taps

Misc. vise grips, lockable pliers, needle box pliers, shears

Misc. tools, old wrenches, hole punch, tire iron, battery cleaner, scraper

Misc. lot of files

Misc. lot of spring clamps, 7” c clamp, Jorgensen 8” wood clamp, (2) 4” c clamps, 2 ½” bench vise

Misc. lot of utility knives and scissors

Misc. lot of ½” ratchet, ½” breaker bar tip is broke and misc. sockets

Misc. lot of ½” sockets, ¾” socket

Craftsman drill out power extractor model 52156, misc. bits, Pittsburgs 12 piece 3/8” drive drain plug socket set, ¼” socket set

Misc. lot of Allen wrenches and small wrenches

Misc. lot of adjustable pliers

Misc. lot of air nozzles, hitch pin, pinch, trailer connection, bolts washer and misc.

Misc. lot of wire brushes and wire wheels

(3) Adjustable wrenches

(8) Misc. box end wrenches

(10) Misc. box need wrenches

(10) Misc. box end wrenches

(11) Misc. box end wrenches

(7) Box end wrenches

Allen 10 Piece metric wrench set

Stanley 6 piece metric wrench set

Klutch 3 piece tubing wrench set

(17) Misc. box end wrenches

(14) Misc. box end wrenches

(11) Misc. large wrenches, one end is broken on one

Craftsman ratchet wrenches, 5/16”, 3/8” ½”, 9/16” , 5/8” and 11/16”

Hamilton drafting table with five drawers, 72” long, 37 ½” wide, comes with stool

50’ air hose and (2) 25’ air hoses

Misc. torches, brazing tips and bottles

(16) Ratchet wrenches, some are Craftsman, Snap On, KMC, Ideal and misc.

Craftsman & misc. nut drivers

Misc. drill bits

Misc. drill bits

Hilti TE12S hammer drill, the cord is bad

Astro 3” air buffer

Misc. grinding stones, BR air die grinder and router bits

(2) Cen-Tech multi meter, American model 2608 multi meter

Drill Master 4.8 volt cordless screw driver, misc. drill bits and sockets

Blue Point FT-5 double flaring tool kit and (2) misc. flaring clamps

Skil jigsaw, Craftsman 3/8” electric drill, 3/8” close quarter drill

Misc. hardware, see pictures

4 in 1 Eletric Jack air pump electric impact, 12 volt lighter power, appears to be new

(6) Cans of Iron truck bed coating, misc. under costing, brake clean, staring fluid

Motorcraft carburetor

Lighted stop stand

Rubber mat piece

Approximately 100’ of 6 gauge wire, 500’ of 10 gauge stranded, 300’ of 10 gauge stranded, 200’ of 10 gauge stranded, 300’ of 12 gauge stranded, (3) 300’ spools of 12 gauge stranded wire

Antique steering wheel

Large lot of sand paper, scuff pads and sanding tools

Mirka random orbital sander, central Pneumatic 6” dual action air sander and lot of misc. sanding disc

(3) Small paint sprayers, (3) large paint sprayers, bag full of paint strainers

Misc. grease guns

Drill Doctor model 500SP

EZ Clean 15” surface cleaner attachment

Craftsman 7 ¼” circular saw

Porta Cable 16 gauge finish nailer, ¾” to 2 ½”, works

(2) Pry bars, small crow bar, scrappers, cold chisel & misc

Central Pneumatic straight line sander, model 280 with Misc. sand paper

Misc. Tape

(2) Jack stands and a bottle Jack

Chicago electric buffer, Craftsman buffer and misc. pads

Drill Master buffer and another buffer and buffing pads

Craftsman 10” orbital buffer/ car polisher, bottom piece is broke and misc. buffing pads

(2) Jumper cables

Tool box with three drawers and top storage, 20” long, 8 ½” deep, 13” tall

Misc. heat shrink tube and (4) stamp sets

(8) Plastic drawer storage units, misc. screws, nuts, bolts, wire nuts, light bulbs and misc.

Finish Line gravity feed paint sprayer, Finex gravity feed paint sprayer, Central Pneumatic gravity paint sprayer and misc.

Misc. buffing compounds

(3) Gravity feed paint sprayer stands

Orbital 8” air sander and sanding disc

Two tier roll around cart, 36” x 24” x 32” tall

Misc. extension cords

Horse shoe set, two stakes and 4 shoes

Keson measuring wheel

(2) Measuring wheels

Powermatic air sander, Black & Decker sheet finish sander, Craftsman palm random orbit sander, Black & Decker quick finish power sanding block

Misc. patch tire kits

Misc. sanding tools, (3) slide hammer, file, (5) rasp

Misc. drill bits, Philip drill sets, Drill Master screw extractor movers kit, ¾” drive ratchet

DeWalt 18 volt drill and light (2) batteries and (2) chargers

Wet/Dry vacuum

Delta mortising attachment model 17-905

Misc. extendable magnets, 12 volt strobe light, bolt circle template, adjuvant drill stop, battery terminal cleaner, specialty wrenches, faucet wrench and misc. small tape measure

Binks air regulator and separator

Misc. levels, tape measures, flashlight, square, workmate clamp, 4’ aluminum rulers/ straight edge

Craftsman specialty sockets

(2) Drawer bins with misc. flare fittings, shrink tube, cotter pins, drum brake springs, clamps

Two wheel dolly, four wheel dolly and the shipping blanket

(3) Wuarts of 20-50 oil, (3) quarts of VR1 40 weight racing oil, tie down strap, cleaves, trailer pins, crows foot pry bar, bungee cords and misc. hooks

(2) Plastic drop clothes, 9 x 12, all purpose coverall, (2) 9” rolling covers, plastic pairing tray, paint applicator, paint brushes

Western snow plow ram, 2” diameter, 23” center of holes

Misc. Bondo filler, body filler, reducer, a painting chemicals, replacement cartilage and filter kit, painting mask, scrappers

2 Gallons of tractor, trans, hydraulic fluid for Case and 5 gallons for John Deere, 2 gallons of multi purpose gear lubricant with pump and empty bucket with pump

Campbell Hausfeld dual action sander, 6” air sanding pad, Ingersoll Rand dual action air sander model 311, Husky 6” air sanding pad