These items are located in West Chicago IL 60185 Contact Randy (630-774-0031) Monday to Friday - 7:00 am to 3:00 pm For Inspection or Removal AppointmentALL ITEMS MUST BE PICKED UP BY THURSDAY, SEPTEMBER 23rd INSPECT ALL ITEMS BEFORE BIDDING - THE ENTIRE RISK AS TO THE QUALITY, AUTHENTICITY & CONDITION RESTS WITH THE BUYER. Reserves - 10% Buyers Fee – 7% Sales Tax

Hamilton drafting table with four drawers, work surface is 6" long, 37" wide, comes with roll around stool, small hole in the front of cushion

(2) Roll around office chairs, minor wear to cushion

Knaack 4824 job master chest, 4' long, 2' deep, 3" tall, scratches and dents

(3) Man ladder racks, 67 1/2" long, minor rust

Knaack roll around tool box, 61" long, 30 1/2" deep, 42 1/2" tall, top of tool box is rusty from sitting outside, scratches and dents

Knaack roll around two door cabinet with three shelves, 5' long, 2' deep, 66" tall, rusty from sitting outside, scratches and dents

Roll around tool box, 4'  long, 30" deep, 40" tall, rusty from sitting outside, scratches and dents

(7) Scaffolding plank out riggers, would fit a 20" plank

(4) Scaffolding plank out riggers, would fit a 18" plank

(2) Scaffolding plank out riggers

Werner task master aluminum platform, 19' 4" long, 2' wide

Werner task master aluminum platform, 19'4" long,  24" wide

Werner task master aluminum platform, 19' 4" long, 2' wide 

Werner task master aluminum platform, 19' 4" long, 2' wide

Tear drop pallet racking, (2) up rights are 42" long, 5' tall, (2) cross beams that are 11' long, (3) cross beams that are 147" long

(26) 14" x 1" Arbor cut off blades, new and (13) that are used

(10) 16"x 1" Arbor cut off blades, new and (2) that are used

(3) Boxes of 1/4" x 3" eye lag screws, new

(4) Boxes of 1/4-20 x 5" toggle bolts, new

(3) Boxes of 1/4-20 x 5" toggle bolts, new

Darts 10- 16 x 1-5/8" flat self drilling screws, Darts 6 x 1-5/8" bugle self drilling screws, Darts #12-24 x 2-1/2" flat self drilling screws, construction screws 6 x 1-1/4", some boxes are open 

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

Roll around bakers rack, (2) up rights 29" wide, 74 1/2" tall with casters, (2) rails that are 70 1/2" long, and a plank that is 67 1/2" long, 28" wide

(2) 29" x 72" Tall uprights, (2) 70" rails, no plank or casters

(2) 29" x 72" Tall uprights, (2) 70" rails, one set of upright has casters, no plank

(6) Scaffold plank extensions, 29" wide, 40" tall

(4) Rails that are 70" long, only two pictures but there are four of them

(20) 12" x 1" Arbor cut off blades, new

(20) 12" x 1" Arbor cut off blades, new

(20) 12" x 1" Arbor cut off blades, new

Bosch 14" chop saw 1365, model #0 601 365, 115 volt, works

Acoustical ceiling trim saw, table is 35 ½" x 30", comes with hose and bag

Duro Dyne Corp. pin spotter, works

Power Rawl R35S power nailer with ½" top hat drive pins

Milwaukee 3/8" hammer drill, works

Vestil double scissor pallet puller, model PAL-21

Black & Decker heavy duty 2 speed cut saw, screws need to be tighten up on unit, works

DeWalt ½" VSR cordless drill with battery and charger

DeWalt DW274 VSR drywall screw driver, Craftsman ½" drill, works

Kett electric sheer cutter, model E-140, works

Skilsaw7 ¼" worm drive saw, works

Ramset/Red Head power nailer, model RS27, comes with .27 caliber strip loads

Ramset/Red Head power nailer, comes with .27 caliber strip loads

Rockwell template for door hinges model 5518

Milwaukee sawzall, cat. No 6527, works

Ladd ceiling master model 1600, comes with power loads and wire brushes

Cadillac blower with hose, 115 volt

Hilti DX350 power nailer and a Ramset model D60 power nailer, comes with .22 caliber power loads

(2) Wal-Board aluminum adjustable saw horses, 4' long, 9 ½" wide

Pneumatic tool with extra bits

Milwaukee adjustable clutch screw shooter, works

Spectra-Physics laser level SL, model 942, does not work

Spectra-Physics laser level SL, model 942, does not work

Spectra-Physics laser level SL, model 942, does not work

Black & Decker 16 gauge nibbler, works

Acoustical ceiling trim saw, table is 54" long, 20 ½" wide, comes with hose and bag

Hitachi 16" cut off saw, model CC16SA, works

Ryobi 10" drill press, model DP101, 120 volt, 570-3050 rpm, works

Wire mold cutter, 3' long

Milwaukee heavy duty band saw, missing blade, works

Ramset TrakFast power nailer

Paslode Impulse cordless power fastener, missing charger

Paslode battery operated 16 gauge stapler, model IM200

Ramset TrakFast power nailer

Paslode battery operated 16 gauge stapler, model IM200

Bosch Bulldog 11224VSR roto hammer, works

Adjustable roller stand

Skil hinge butt template No. 17070

Omark model 330 tool and a Ramset power actuated tool, units need repair

Paslode stapler model PI-N50, Florida Pneumatic heavy duty hammer model FP-1010, power nailer model 4150

Cherry riveter with 2 boxes of rivets

Door and jamb preparation for lock set installation

48" Drywall T square, Servess level, Wal-Board corner bead setting tool, Arrow T50 stapler, (2) rubber malts, hard hat, safely glasses, marking caulk, caulk line, yellow ribbon and misc.

Drywall T square, (2) levels, hard hat, yellow ribbon, (2) rubber malts, safely glasses, side cutters, Irwin speedor, Stanley Fat Max level, trowel and misc.

2" Pintle hitch on a 2" adjustable receiver

DeWalt DW0736 construction tripod, appears to be like new

Ramset model D60 power nailer, comes with .22 caliber power loads

Misc. drill bits and parts

Power nailer model 4150, comes with .22 caliber power loads

13" Tile cutting machine

(2) 13' 6" Wood stretch planks

(13) Low partition wall, 3' tall, 2" x 2" x 3/16" wall, (1) 4x4 outside corner

Misc. Ramset 1 ¼" ceiling clip assemblies, .27 caliber safety strip loads, (20) .22 caliber power loads, Palsode trim fuel

Misc. self drilling screws, wafer rockon screws, self drilling with wings wires, misc. drywall screws

(2) Boxes of Gabber dry wall screws 6x 1 ¼", and one box of 6x  1 5/8" dry wall screws

Werner 24' aluminum extension ladder

16' 6" Wood stretch plank

(5) Misc. boxes of tap con screws and (3) boxes of concrete nails, framing nails

Misc. toppers pan framing screws

Misc. eye lag screws, toggle bolts, hinges, roofing nails, eye lag self drilling screws, galvanized box nails, coated sinker nails, angle clips, u staples, nuts, bolts, washer and misc.

Short job box chains and (5) locks that are keyed alike (No Photo)

Nailers fall protection compliance kit with rope, vest, hard hat and harness

Fall protection with hard hat, vest and harness, used

Fall protection with hard hat, vest and harness, used

Steel platform cart, 5' long, 30" wide, scratches and scuffs

Misc. suspended ceiling brackets, bolts, Ramset, angle irons, toggle bolts, silver tape and foam

(21) 16" x 1" Arbor cut off blades

Rubbermaid 1014 utility gondola, cracks on the front lip of gondola and in the bottom

Misc. steel stubs and channel, (14) stubs that are 8' long, 1/8" thick, they are heavy duty, (4) 8' long x 1/16" thick

Rubbermaid 1324 utility gondola, brush will be cleaned out before pick up

Suspended ceiling tie wire that are 12' and (3) that are 6'