Dresser 510B wheel loader serial # 3380130J000858 (3,361 hours), with 14’ Daniels wing plow (model 01114-008) and multi-purpose 3-yard (7’ 9”) snow bucket; boom kickout, bucket leveler, counterweright, heater, defroster fan, deluxe cab, front and rear wipers, turn signals, tires are like-new

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

John Deere 27C mini excavator, serial # FF027CX221916. 3023 hours, 12” & 20” bucket, 60” dozer blade, tracks are in good condition, minor dents and scratches, seat is torn. Runs and operates.

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

Ditch Witch 1820 trencher, 6 ½” cut by 46” deep, Honda 18hp engine, runs and operates well

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

Hotsy electric hot pressure washer 230V, 4hp, 1ph, diesel or kerosene

Reserve Met – This  Item Now Sells to the Highest Bidder!

Skid Steer auger power head, works good

Reserve Met – This  Item Now Sells to the Highest Bidder!

10” UGS pulling head

12” US Ductal Iron pulling head

6” steel pulling head

10” American pulling head

10” US Ductal Iron pulling head

12” American pulling head

14” American pulling head

15” US Ductal Iron pulling head

10” ID polly to 14” ID polly pulling head

Independent Pipe Producers pulling adapter, 8” x 6” DR II Red

8” SDR II DIPS HDE MJ adapter with out stiffener

8” Dips DR II MJ with no stiffener

18” x 18” SDR-II dips X IPS reducer

(2) MJ 8” IPS DRII adapter

(3) Test plugs – (2) 12” and (1) 8”

(3) Test plugs – 6”, 8” and 12”

Pro-Tec shoring unit 28” to 46”, model HS-C-2846, 4 – 4’ x 8’ OSHA-approved walls, no hydraulic unit.

Reserve Met – This  Item Now Sells to the Highest Bidder!

McElroy Fusion machine part # 42001, comes with cutter, fusing hot pads, and dies; for 1” to 4”

Central Plastics Company universal electrofusion processor, model LR89217

Condux 6-piece quick-connect seal-off kit, new

(2) Hammerlok G80 clevises, (2) G-26-8

(7) Clevises, (1) hook, and misc

Cage Lite Bully Lite, commercial electric work light

Ridgid 36” aluminum pipe wrench

Ridgid 36” aluminum pipe wrench

USA 36” steel pipe wrench

Ridgid 48” steel pipe wrench

Ridgid 3” chain wrench

2” shut off valve with quick-disconnect on each end, CF8M

Sharpe 3” shut off valve CF8M 1000 CWP with quick-disconnect and cap

Sharpe 3” shut off valve CF8M 1000 CWP with quick-disconnect on one end

Sharpe 3” shut off valve CF8M 1000 CWP with quick-disconnect on one end

Pair of 6-ton jack stands 14 ½” to 23”

Quikrete water-stop and quick-setting cement

Snap-On 1 5/8” wrench, Chin 1 7/8” and 2” wrench

Snap-On 2” wrench, Williams 1 3/8”, Autocraft 1 ¼”, China 1 5/8” wrenches

Westward 1 13/16” wrench, China 1 5/8” and 1 ¾” wrenches

1 7/16”, 1 5/8”, 2 3/8” box end wrenches

Armstrong 1” ratchet with 3” socket, ratchet is rusty, lever won’t move all the way

(2) Haulmaster 4000lb cable pullers, like new

Enerpac porta power model P392 with ram and hose

Norton 18” diamond blade, 1” arbor, 12”, 14, and 18” used blades

Norton 14” masonry blade, (3) used 12” blades, (9) used 9” blades

Caldwell model S-3 pipe lifter for 3” pipe, like new

Blackhawk porta-power model P404

Jet body repair kit 10-ton capacity, model BRK-10A

(2) ratchet chain binders, one does not have hooks

(2) Ratchet chain binders

(2) Ratchet chain binders

18’ x 3/8” chain with hook and slip hook

20’ x ½” chain with (2) hooks

Ridgid chain wrench model 3237, 2” to 12”

(2) Model 300 rudder pipe expanders

WYCO concrete vibrator cat # 993, 115V, 11’6” L

(3) Chain binders

Wheeler Rex chain pipe cutter

4-chain bridle 10’ x 3/8” chain

4-chain bridle 8’ x 3/8” chain

Short-handled spade, long-handles digging shovel, (2) long-handled square shovels, scraper, ditching shovel, rake, 10lb sledge, 36” landscape rake

(3) long-handled digging shovels, long-handled square shovel, sod shovel, 36” squeegee, 36” asphalt rake, 8lb sledge, Ames sledgehammer

50’ of ¾” air compressor hose

Dayton 20’ poly lifting strap, model 2MJN9, 8400lbs capacity, new

20’ lifting sling, 13,200 vertical lift; 16’ lifting sling, 8400lb vertical lift

Adaptall plugs and caps kit, JIC

Imperial 4-tray parts cabinet with cotter pings, seal-a-splice pieces, grease fittings, roll pins

Kennedy 5-drawer toll box, 27” W x 18” D x 16 ½” T

Multiquip Mikasa MTX-60 jumping jack compactor (87 hours), Honda GX 100 engine, runs and operates

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

14” directional back reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

10” directional back reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

20” rock reamer head (cobble)

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

14” rock reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

8” back reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

6” back reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

8” back reamer head

Reserve Not Met - Call OAS  (847-546-2095) to inquire about this item.

Reed tapping machine cat # TM100, comes with (3) saddles, pipe expanders, misc tools, good condition

Reserve Met – This  Item Now Sells to the Highest Bidder!

24” x 48” dirt auger, round sleeve

10” x 6’ dirt auger, round sleeve, missing auger tip

20” x 48” dirt auger, round sleeve, missing a few teeth

14” x 6’ dirt auger, round sleeve

30” x 36” dirt auger, round sleeve

36-hole bolt bin with metric bolts, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm; 24” W x 5” D x 24” T

(2) 16-tray parts cabinets, 12 ½” W x 11” D x 11” T, one is missing (2) trays; filled with misc screws, washers, bolts, and nuts

(2) 40-hole parts cabinets, 34” W x 12” D x 24” T, filled with misc nuts, bolts, and washers

Chandler 4” vacuum head with 6” adapter

Master 150,000 BTU turbo heater

Northern 4400lbs pallet jack

Schumacher Fast Charger battery charger, 6/12/18/24V