Snap-on 120 volt mig welder, model YA219B, no tank, worksgood.  (area 53)

7-Drawer roll around tool box with wood top with left sidestorage cabinet.  Tool box is 26 ½” widex 20” deep x 37 ½” tall.  Side box is 15”wide x 19” deep x 30 ½” tall.  Tops ofdrawers are rusty.  (area 53)

Oxygen and acetylene tanks and cart.  (2) Torch cutting heads, Rose Bid and BrazingHead.  About 100 lbs. of acetylene and500 lbs. of oxygen.  (area 53)

Sears Battery charger 225/125 amp with engine start.  (area 53)

Wobbelight 175 watt metal halide, works.  (area 53)

Wobbelight 175 watt metal halide, works but handle isbroke.  (area 53)

Performax roll-around tool box with upper storage, 33” widex 17” deep x 39” tall.  (area 53)

Tool Quality 6” bench grinder 1/4hp, 120 volt, 3450 rpm,comes with wheel dresser tool and face shield. (area 53)

Older Milwaukee 7” angle grinder, works.  (area 53)

Milwaukee 7” angle grinder, cord is dry cracked, works.  (area 53)

Menards 4” belt & 6” disc sander.  (area 53)

Ryobi scroll saw model SC15 VS.  (area 53)

Rodac air sander. (area 53)

National Detroit air DA. (area 53)

Chicago Electric 1600 watt heat gun and ½” Milwaukeedrill.  (area 53)

Ingersoll Rand air drill model 7807R and Central Pneumatic5” air grinder.  (area 53)

Pneumatic saw, Jet Air cut off tool with (4) extra 4 ½”blades.  (area 53)

Ingersoll Rand 3/8” air ratchet and ¼” air ratchet.  (area 53)

Sears 3/8” air ratchet and Mac ¼” air ratchet.  (area 53)

Snap-on ½” air impact model IM-5A, works.  (area 53)

Milwaukee ½” electric drill, 3/8” air drill and Husky cutoff tool.  (area 53)

Steel work bench with Cummins No. 5 swivel vise, 80” long x24 ½” wide x 34” tall.  (area 53)

Floor Jack, works. (area 53)

Floor Jack, works. (area 53)

Pittsburgh 10-piece wrench set, 3/8” to 1” and Pittsburgh11-piece metric wrench set, 10mm to 26mm. (area 53)

12-Piece Craftsman metric wrenches, 7mm to 19mm; (26) misc.open and box end wrenches, Husky 12” adjustable wrench and 8” bench topadjustable wrench.  (area 53)

(47) Misc. 3/8” drive Craftsman and Husky metric, standardand deep well sockets.  (area 53)

(30) Misc. ½” drive deep well sockets and (14) misc. shallowwell ½” drive sockets.  (area 53)

Misc. Snap-on and Craftsman ¼” drive sockets – deep &shallow well, extensions and ratchet. (area 53)

Craftsman & Oxwall ½” drive ratchets, misc. extensions,breaker bar, (3) adaptors 3/8” to ½”; ½” to 3/8” and ½” to ¾”.  (area 53)

Snap-on 3/8” drive flex head ratchet, (2) misc. 3/8”ratchets, (2) 3”, (3) 6” and (1) 15” 3/8” extensions.  (area 53)

Snap-on ratchet wrenches ¼” to 5/16”, (2) ½” to 9/16”, 5/8”to 11/16”, Dunlap 5/8” to ¾” and (8) misc. ratchet wrenches.  (area 53)

Blue-Point AVR chisel and (10) misc. bits.  (area 53)

Appliance dolly. (area 53)

Misc. body tool pry bars, K-D tools pickle fork, windshieldtools and (4) plastic wedges.  (area 53)

Misc. taps and dies. (area 53)

(4) Tin snips and (3) vise grip clamps.  (area 53)

(10) Vise grip plyers and (4) vise grip clamps.  (area 53)

(8) Misc. body blocks, rasps and (2) body hammers.  (area 53)

Rubber mallets, rawhide hammer, ball pien hammer, hammer handleand (3) misc. hammers.  (area 53)

Snap-on 8-piece solid carbide burr set (5) unibits, misc.de-burring bits.  (area 53)

Misc. drill bits, spade bits and concrete bits.  (area 53)

Central pneumatic blast gun and husky HVLP spray gun.  (area 53)

10-Piece gasket hole punch set (the ¾” one is broke), misc.drill bits and hole saws.  (area 53)

Misc. sanding discs, buffing wheels, wire wheels and brushesand (2) vinyl letter removers.  (area 53)

(6) Misc. hammers. (area 53)

Misc. screw drivers, Blue-Point ratchet screw driver.  (area 53)

Misc. side cutters, hose cutter, nail clipper, channellocks, 14” pipe wrench, needle nose pliers’ and misc. pliers’. (area 53)

Grommets and installation tool, rivet gun, 25’ tape measure,scissors, utility knives, sanding block, pocket knives and needles andthread.  (area 53)

Grease gun, ring retainer, magnets, compression tester,anti-freeze testers, wire strippers, battery tester, post cleaner, Wellersoldering iron, hone (stones are bad) and flare tool.  (area 53)

Milwaukee sawzall with plastic case.  (area 53)

Weller soldering iron, solder and (2) test lights.  (area 53)

Misc. pry bars, chisels, punches, files and plastic prybars.  (area 53)

Johnson 4’ plastic level, 48” drywall T square, framingsquare, small square, angle square, hack saw and blades and pair of knee andshin guards.  (area 53)

X-Acto knives, sharpening stones, air blow gun and fittings,chisels, torques screw drivers and misc. Allen wrenches.  (area 53)

Swingline electric stapler, Arrow T50P stapler and misc.staples.  (area 53)

(2) Cable come-a-longs and small bottle jack.  (area 53)

25’ 12ga extension cord, 25’ 14ga extension cord, (2)flashlights, strip bar, misc. plug ends, screw on battery terminals and IdealAC-DC tester.  (area 53)

Small block Chevy aluminum valve covers.  (area 53)

Marine utility pump 12 volt DC 200 GPH.  (area 53)

Brute 5 gallon shop vacuum, 4.5hp.  (area 53)

Alpine MP3 CD radio, model CDE-9870.  (area 53)

Yale ½ ton chain fall, pulleys have some chips out ofthem.  (area 53)

(2) Fluorescent lights on adjustable stands.  (area 53)

(2) Fluorescent lights on adjustable stands.  (area 53)

Werner 2-step step ladder, stool. Hamilton Beach electricknife and roll-around adjustable stand with hooks.  (area 53)

5 Gallon safety can with funnel (something is rattling inside).  (area 53)

Misc. washers, screws, nuts & bolts, eye bolts, (2) 12”planer blades and pieces of square stock. (area 53)